The Light Duty Utility Glove is a multifunctional utility glove for performing light duty work. The glove may be worn alone or as a shell and in combination with thermal inserts or chemical protective handwear.

Design

The gloves shall be unlined, all leather, slip on Gunn Cut style with wing thumb. The glove shall be inseam sewn and the glove edge shall be inseam sewn with leather binding and then shall be turned over and hemmed. The glove shall have a slit opening which shall be turned over and hemmed with a hook and loop tab for adjustability on the back of the wrist. The glove shall be made from full grain cowhide leather with a thickness of 2.25 ± 0.5 ounces with low water retention. It shall be Foliage Green 504 in color with a reverse full grain cowhide palm patch. Palm patch shall provide seam reinforcement for thumb and index finger. The thickness of the leather binding shall be 2.25 ± 0.5 ounces and the width shall be 11/16 inches wide ± 1/16 inches and shall be Foliage Green 504 in color The glove shall also have a 3/8 inch nylon webbing loop at wrist for means of attachment to the MOLLE, etc.

Specification

• GL/PD 08-12

Nomenclature

• GLOVES, MEN'S AND WOMAN'S, LEATHER, LIGHT DUTY, UTILITY, FOLIAGE GREEN 504

Logistics

• Black, GL/PD 12-08C, PGC: 04118^[1]
  • Small: 8415-01-644-4837
  • Medium: 8415-01-644-4838
  • Large: 8415-01-644-4843
  • X-Large: 8415-01-644-4844
  • XX-Large: 8415-01-644-4846
  • 3X-Large: 8415-01-644-4847
• Foliage Green 504, GL/PD 12-08B, PGC: 03565
  • Small: 8415-01-566-3774
  • Medium: 8415-01-566-3775
  • Large: 8415-01-566-3876
  • X-Large: 8415-01-566-3877
  • XX-Large: 8415-01-566-3881

References

• Army Handwear APBI [2007][2008][2010]
• http://www.ansellhawkeye.com/site/products-lightduty.html

Notes

1. ↑ https://sam.gov/opp/fa8cb1b7f4b4c0392e275849a0a30e3e/view