Purchase description AR/PD 10-01 covers the requirements for the ballistic protective Nape Pad which provides ballistic protection to the area below the Advanced Combat Helmet and Enhanced Combat Helmet at the nape (back of the neck). This is a Critical Safety Item. This specification delineates the Nape Pad end item and its component performance requirements. This Nape Pad is functionally integrated with the Improved Outer Tactical Vest (IOTV) (FQ/PD 07-05), Advanced Combat Helmet (AR/PD 10-02), and Enhanced Combat Helmet (GL/PD 09-04).

Purchase description AR/PD 10-02 covers the performance and verification requirements for the Advanced Combat Helmet, a protective helmet consisting of a ballistic protective shell, pad suspension system, and 4-point chinstrap/nape strap retention system.

Purchase description AR/PD 10-03 covers the X-Side Ballistic Insert (XSBI) worn by ground troops. When placed in the Outer Tactical Vest (OTV) / Improved Outer Tactical Vest (IOTV) (as a component of the Interceptor Body Armor (IBA) system) the insert will provide ballistic protection from specific 5.56 mm and 7.62 mm rifle rounds.

Purchase description AR/PD 10-04 provides for a multiple threat body armor system consisting of a base vest, cummerbunds and side plate pockets for tailoring protection levels to defeat multiple ballistic hazards across the battlefield continuum and manage armor weight. The SPCS is a critical safety item. This specification delineates system, subsystem, component, and subcomponent level performance requirements to accomplish the end item body armor performance. SPCS is functionally integrated with Modular Lightweight Load-carrying Equipment (MOLLE).

Purchase description CO/PD 00-02 provides for a multiple threat/Interceptor body armor system (IBA) consisting of a base vest and modular components (OTV) for tailoring protection levels to defeatmultiple ballistic hazards across the battlefield continuum and manage armor weight.

Purchase description CO/PD 02-02 covers the Modular Lightweight Load-carrying Equipment.

Purchase description CO/PD 02-05 covers a bag used to carry medical supplies by a combat medic or corpsman in the armed forces.

Purchase description CO/PD 04-19 covers an Enhanced Small Arms Protective Insert (ESAPI).

Purchase description CO/PD-05-01 covers the requirements for a neck gaiter to be worn by service personnel.

Purchase description CO/PD 05-04 covers the performance and verification requirements for the Advanced Combat Helmet, a protective helmet consisting of a ballistically protective shell, pad suspension system, and 4-point chinstrap/napestrap retention system.

Purchase description CR/PD 02-2008 SYSCOM covers the requirements for the Marine Corps Light Duty Glove Insert for stand-alone use or under the Light Duty Work glove for use in all environments.

Purchase description CR/PD 03-18 covers the requirements for boot socks that incorporate antimicrobial properties.

Purchase description CR/PD 05-08 covers the requirements for a moisture-wicking t-shirt.

Purchase description FQ/PD 06-35 covers the performance and verification requirements for the Lightweight Fragmentation Helmet.

Purchase description FQ/PD 07-03 covers the X Small Arms Protective Insert (XSAPI) worn by ground troops. When placed in the Outer Tactical Vest (OTV) / Improved Outer Tactical Vest (IOTV) or Soldier Plate Carrier System (SPCS) (as a component of the Interceptor Body Armor (IBA) system) the insert will provide ballistic protection from specific 5.56 mm and 7.62 mm rifle rounds.

Purchase description FQ/PD 07-05 provides for a multiple threat/Interceptor body armor system (IBA) consisting of a base vest and modular components (IOTV) for tailoring protection levels to defeatmultiple ballistic hazards across the battlefield continuum and manage armor weight.

Purchase description GL/PD-06-01 covers the requirements for a lightweight undershirt, which serves as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-02 covers the requirements for a synthetic grid fleece shirt, which serves as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-03 covers the requirements for a fleece jacket, which serves as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-04 covers the requirements for a wind protective jacket, which serves as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-05 covers the requirements for a soft shell jacket, which serves as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-06 covers the requirements for a waterproof, extreme cold/wet weather jacket, which serves as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-07 covers the requirements for an insulated loft jacket, which serves as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-14 covers the requirements for lightweight drawers, which serve as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-15 covers the requirements for synthetic grid fleece drawers, which serve as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-16 covers the requirements for a soft shell trouser, which serves as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-17 covers the requirements for waterproof, extreme cold/wet weather trousers, which serve as a layer of the GEN III ECWCS.

Purchase description GL/PD-06-18 covers requirements for insulated loft trousers, which serve as a layer of the GEN III ECWCS.

Purchase description GL/PD 07-09 covers a modular sleeping bag system that consists of a patrol sleeping bag, an intermediate cold weather sleeping bag, a waterproof bivy cover and two compression stuff sack to carry the components of the system.

Purchase description GL/PD 07-12 covers the requirements for three types of flame resistant (FR), camouflage cloths, for use in the flame resistant clothing.

Purchase description GL/PD 07-13 covers the requirements for a single-breasted combat coat, a component of the army combat uniform.

Purchase description GL/PD 07-14 covers the requirements for combattrousers, a component of the army combat uniform.

Purchase description GL/PD 07-19 covers the requirements for the retention system to be used with the Advanced Combat Helmet.

Purchase description GL/PD 08-12 covers requirements for light duty work Gloves used by DoD personnel. Gloves may be worn alone, or for additional warmth under cold conditions,may be worn with the wool inserts covered by A-A-55119, or they may be used as wear over chemical protective handwear as covered by MIL-DTL-43976.

Purchase description GL/PD 08-75 covers the requirements for a Desert Sand-colored Hot Weather Combat Boot for use in both hot weather wet and dry environments.

Purchase description GL/PD 08-81 covers the requirements for Army Combat Gloves that provides maximum dexterity, tactility, flexibility, and flame and cut protection. The Combat Gloves are intended to be worn by Army personnel.

Purchase description GL/PD 09-73 covers the requiremnets for a flame retardant Advanced Combat Shirt.

Purchase description GL/PD 10-01 covers the requirements for a waterproof combat boot for use in rugged, mountainous terrain.

Purchase description GL/PD 10-02 covers the requirement for a flame resistant Army Combat Shirt.

Purchase description GL/PD 10-07 covers the requirements for textured nylon duck cloth, dyed or dyed and overprinted with a camouflage pattern.

Purchase description GL/PD 10-08 covers the requirements for a Flame Resistant, Pressure Sensitive Adhesive, Integrated Patch Kit (IPK) which is designed to be used by military personnel in the United States Army as a means to make field expedient repairs in a field environment to their Flame Resistant uniforms.

Purchase Description GL/PD 11-01 covers the requirements for a Desert Sand-colored, waterproof, temperate weather combat boot for Infantry, Flight and Combat Vehicle Crewman use.

Purchase description GL/PD 12-25 covers the requirements for combat pants with integrated kneepads to be worn by the Army.

Purchase Description GL/PD 14-04 covers the requirements for unisex and female combat coats to be worn by the Army.

Purchase Description specification covers the requirements for unisex and female combat trouser to be worn by the Army.

Purchase description MC/PD 01-2012 SYSCOM covers the requirements for the U.S. Marine Corps Leather Light Duty Gloves.

Purchase description MC/PD 04-2011 SYSCOM covers the requirements for the U.S. Marine Corps cold weather cap.

Purchase description NCTRF PD 04-09 covers the requirements for the US Navy working uniform parka in desert and woodland camouflage.

Purchase description NCTRF PD 06-11 covers requirements for camouflage, waterproof and moisture vapor permeable cloths with Anchor, Constitution, and Eagle (ACE) printed logo.

Purchase description covers the requirements for the US Navy working uniform boonie cap in desert and woodland camouflage.

Purchase description NCTRF PD 15-06 covers a waterproof, moisture-vapor-permeable parka that accepts a zip-in liner for use by US Navy personnel.

Purchase description PD 77 AESG 06-22 covers the requirements for one type of cloth, waterproof and mositure vapor permeable, Air Force digital tiger stripe, printed pattern used in the fabrication of Air FOrce garments.

This purchase description covers the requirements for the U.S. Marine Corps Rugged All Terrain (RAT) Boot Hot Weather.

This purchase description covers the requirements for the U.S. Marine Corps Rugged All Terrain (RAT) Boot Temperate Weather.

This purchase description covers the requirements for the Marine Corps enhanced flame resistant combat ensemble, blouse and trouser.

This purchase description covers the Family of Improved Load Bearing Equipment utilized by the United States Marine Corps.

This purchase description provides for a multiple threat body armor system consisting of a base vest and modular components for tailoring protection levels to defeat multiple ballistic hazards across the battlefield continuum and manage armor weight. The Improved Modular Tactical Vest is a critical safety item.

This purchase description covers the requirements for the Inclement Weather Combat Shirt (IWCS). The shirt is designed to provide flame resistance and inclement weather protection needed for wear in field and combat operations.

This purchase description covers the requirements for the Marine Corps combat utility uniform blouse and trousers.

This purchase description provides for a multiple threat body armor system consisting of a base vest and modular components for tailoring protection levels to defeat multiple ballistic hazards across the battlefield continuum and manage armor weight. The Plate Carrier is a critical safety item.

Purchase Description WNUV 12-03 covers the general requirements and inspections for the Air Force Airsave survival vest designed to integrate chemical protective systems, oxygen systems, flotation systems, and survival equipment.